PF series impact hammer crusher_Jiangsu Pengfei Group Co., Ltd. Products catalog

PF series impact hammer crusher

Overview: The impact hammer crusher product can process various ore materials (granite, limestone, basalt, etc.) with particle size not exceeding 500mm and compressive strength exceeding 350 megapascals. It has the characteristics of high crushing ratio, high efficiency and energy saving, and easy maintenance. The product has a cubic shape and adjustable discharge particle size, and is widely used in industries such as hydropower, highways, railways, artificial sand and gravel, and construction....

Tel: +86-513-88755311 88755027

Product Introduction Working principle Equipment Composition Technical Parameter

Working principle

Under the drive of the electric motor, the rotor rotates at high speed. After the material enters, it collides with the plate hammer on the rotor and breaks, and then it is counterattacked and broken again on the lining plate. Finally, it is discharged from the discharge port.

Equipment Composition

1. Counterattack plate
2. Counterattack frame
3. Lining plate
4. Feed inlet
5. Base
6. Rotor frame
7. Plate hammer

Technical Parameter

Model	Specification	Feed inlet size	Maximum feed side length	Production capacity	Motor power	Weight (excluding motor)
PF-0607	Ф644x740	320x770	100	15-25	30	4
PF-0807	Ф850x700	400x730	300	25-35	30-45	8.13
PF-1007	Ф1000x700	400x730	300/600	37-45	30-55	9.5
PF-1010	Ф1000x1050	400x1080	350/600	50-80	55-75	13.2
PF-1013	Ф1000x1300	650x1350	400/600	80-120	90-110	12
PF-1210	Ф1250x1050	400x1080	350/600	70-120	110-132	15.2
PF-1214	Ф1250x1400	400x1080	350/600	130-180	132-160	20
PF-1310	Ф1300x1050	490x1170	400/650	70-120	110-160	13.5
PF-1315	Ф1320x1500	860x1520	500/650	150-220	180-220	20.5
PF-1320	Ф1320x2000	860x1520	500/650	160-250	180-260	19
PF-1515	Ф1500x1500	850x1580	550/700	220-280	280-315	29.5